STEEL CLASS ZZ GAGE PINS & SETS

Make quick and accurate measurements with Vermont Gage pin gages. Measure hole diameters, calculatedistances between holes, gageslot widths and locations. Use for Go/NoGo inspection. Set micrometers, verniers and other measuring devices.

• Class ZZ (.0002" or 0.005mm tolerance)
• Go (Plus) or NoGo (Minus)
• .0005" or 0.01mm diameters
• .001" or 0.02mm set increments
• Tool Steel; 60/65 Rc
• 2" Long
• 10 microinch finish or better
• Round within .0001" or 0.0025mm
• Marked with diameter and direction of tolerance on gages over .0605"
• Certificate of Accuracy is included.
• ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.