产品搜索
|
螺纹Hole Location
螺纹孔定位柱
CMM螺纹孔位置度检测
检测螺纹孔CMM三坐标辅助检测
进口vermont gage量规
CMM螺纹孔位置度检测
检测螺纹孔CMM三坐标辅助检测
进口vermont gage量规
将螺纹孔定位规旋入螺纹孔中，旋紧后将上面的圆柱做为测量的参照物，测量两螺纹孔中心距时需同时用两个螺纹孔定位规，用卡尺测量两个圆柱的外侧总长再减去两个圆柱直径和的二分之一。定位测量时，用三坐标测量机的测圆柱功能，求取圆柱的轴心做为螺纹孔的坐标依据。
THREAD HOLE LOCATION GAGES
Flexible Hole Location Gages are used to inspect the centerline distance between two or more threaded holes. They may also be used to measure the perpendicularity from the face of the threaded part to the centerline pitch diameter of the threaded hole. The parallelism between other features and the centerline pitch diameter of the threaded hole may be measured as well. The key feature is the gages are designed to engage the threads on the flanks, not the face of the part. This ensures the accuracy of the measurement independent of other features of the hole or part.
- Available in INCH & METRIC sizes
- Used to inspect the centerline of two or more holes to each other
- Used to inspect the perpendicularity of a threaded hole to the part’s face