产品搜索
|
进口Step Gage
型号:
Step Gage就是将通止规做在一头, 直接通即通,止即止。
STEP GAGES
Step gages may be used as a progressive gage where the Go diameter is the step and the NoGo diameters is the larger diameter. They are also used as alignment pins.
- Class ZZ (.0002" or 0.005mm tolerance) or Class Z (.0001" or 0.005mm tolerance)
- Go (Plus) or NoGo (Minus)
- Tool Steel; 60/65 Rc
- 2" Long
- 10 microinch finish or better
- Round within .0001" or 0.0025mm
- Marked with diameter and direction of tolerance on gages over .0605
- Certificate of Accuracy is included.
- ISO 17025 Accredited and Non-Accredited Calibration Certificates may be purchased.
NDRICAL PLUG / PIN GAGES
Cylindrical plug gages are available in three design styles:
- Class XX, X, Y, Z or ZZ
- Direction of Tolerance:
- Go: Plus
- NoGo: Minus
- Master: Bilateral
- Gage Design:
- Reversible
- Taperlock
- Trilock
- Diameter Range: .0040" - 6.0100" (See Chart Below)
- Certifications:
- Certificate of Accuracy included.
- ISO 17025 Accredited Certificates & Non-Accredited Certs may be purchased.
- See pages 12 - 15 & 20 - 23 in the 2016 Gage Catalog for more information
Diameters (Inches) | .004" - .105" | .105" - .760" | .760" - 1.010" | 1.010" - 1.510" | 1.510" - 6.000" |
---|---|---|---|---|---|
Reversible | X | X | X | ||
Taperlock | X | X | X | ||
Trilock | X | X | X |